06/15 Rev. 03
USER MANUAL
Mounting the printer
64-xx
5
Mounting the 64-xx
The 64-xx has been designed as a desktop printer, which means that it is normally
mounted in an upright position on a table [2]. Other sufficiently large, level and sturdy
surfaces can also be used as a base.
[6] The correct orientation of the 64-04.
WARNING!
When choosing a base for the printer, observe the following guidelines to avoid dan-
gerous operating conditions:
The base needs to be at least as deep and wide as the printer itself.
The surface needs to be level, solid and dry.
The printer’s fan and ventilation slits must not be obstructed, as the device may
overheat otherwise.
The printer must not be mounted in the immediate vicinity of other heat sources.
The environmental conditions specified (temperature, air humidity, etc.) need to
be complied with.
The power cable should be run to the printer so that
• nobody will trip on it, and that
• the power plug can easily be pulled out if necessary.
