06/15 Rev. 03
USER MANUAL
Mounting the printer
64-xx
3
[3] D o n ´t use the cutter as a handle!
5. Grab the printer from underneath and lift it out. The material feed slot in the back
wall of the printer [3A] can be used as a handle.
Printers with mounted cutter: The motor [4B], but
not
the cutter [4A] may be
used as a handle!
[4] Lift the printer out of the box.
A
Back wall of printer (not visible)
B
Front cover (do not use for lifting)
C
Rubber feet
6. Place the printer on a level surface in its usual operating position (rubber feet [4C]
at the bottom).
The
original packaging
should always be used for transporting the printer!
WARNING!
Printers with mounted cutter: The cutter may cause cut injuries.
Do not grasp the cutter [3A] as a handle.
Use the cutter motor [3B] as a handle.
A
B
B
C
A
CAUTION! - Do not lift the printer by the front cover [4B]. The front cover is a movable
part not designed for handling stress.
