10/14 Rev. 03
USER/SERVICE MANUAL
Technical Data
64-xx Gen. 2/3
3
•
Online Verifier
: The online verifier (OLV) checks printed bar code immediately af-
ter printing it. If the bar code has not been printed or has not been printed in a read-
able way, the OLV stopps the printer.
•
Keyboard
for standalone operation
•
Foot switch
for triggering the label dispenser (printer must be equipped with single-
start option)
Options 64-0x Gen. 3
Internal Options
...should be factory-fitted or installed by a service engineer:
•
Reflex sensor
: Light barrier fork that apart from the transmission sensor, also con-
tains a reflex sensor.
•
Fullsize sensor
: Punch sensor which can be shifted across the full material width.
The fullsize sensor can not be used under one of the following conditions:
– The printer is a 64-0x Dispenser (type A or M).
– The printer is operated with the online verifier (see below) option.
•
USI
(Universal Signal Interface): can e.g. be used to control an applicator or a
scanner.
•
2
nd
CompactFlash slot
on a daughter board
•
Antistatic kit
: reduces electrostatic charge, which can especially arise of the pro-
cessing of plastic labels. Electrostatic discharge can damage or destroy electronic
circuits of the printer.
•
Single-Start option
: Connector for a foot switch or another external signal, which
is supposed to start or stop the printer.