Novexx Solutions 64-04, User Manual, Page: 260 / 438

06/15 Rev. 6.00-02 USER- / SERVICE MANUAL Info-Printouts & Parameters
64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
143
Roll run length
64-xx ALX 92x DPM PEM ALX 73x (PMA)
Shows the total "covered distance" of the print roller. The counter is reset with
each calling of the parameter
SERVICE FUNCTION > Roller exchange = yes
. Maximum
value: 4 billions.
Cuts on knife
64-xx

Only with mounted and activated cutter.
Shows the number of cuts done by one knife. The counter is reset with each
calling of the parameter
SERVICE FUNCTION > Cutter exchange = yes
. Maximum value:
4 billions.
Tot. mat. length
64-xx ALX 92x DPM PEM ALX 73x (PMA)
Shows the total "covered distance" of the feed roller. In comparison to the
counter Roll run length, this counter is not reset after a roller exchange. Max-
imum value: 4 billions.
Tot. foil length
64-xx ALX 92x DPM PEM ALX 73x (PMA)
Shows the total "covered distance" of the ribbon roller.
Total cuts
64-xx

Only with mounted and activated cutter.
Shows the number of cuts done by all knifes. In comparison to the counter
Cuts on knife, this counter is not reset after a knife exchange. Maximum val-
ue: 4 billions.
Total head moves
64-xx ALX 92x DPM PEM

Only with mounted and activated cutter.
Shows the counter for every up and down movement of the printhead. Maxi-
mum value: 4 billions.