06/15 Rev. 6.00-02
USER- / SERVICE MANUAL
Info-Printouts & Parameters
64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
44
The plain copy line of the barcodes EAN8, EAN13, UPC-A and UPC-E is prin-
ted with the same fonts, which older printer types like TTK or TTX x50 have
used.
UPC plain-copy
64-xx
ALX 92x
DPM
PEM
ALX 73x (PMA)
The position of the first and last digit in the plain-copy line - underneath the
bar code - can be adjusted as required.
Raised
First and last digit of the UPCA or first digit with the UPCE are raised (default
setting).
In line
All digits in the decoded line are in line under the code.
EAN Readline
64-xx
ALX 92x
DPM
PEM
ALX 73x (PMA)
<> Signs
Readline enclosed in "<>" signs or terminated by a ">"-Sign (EAN 13).
Standard
Readline without "<>" or ">" signs (default).
EAN sep. lines
64-xx
ALX 92x
DPM
PEM
ALX 73x (PMA)
EAN separation lines. Parameter for controlling of EAN or UPC barcodes if
they are printed without readline.
With readl. only
(Default) The separation bars at the beginning, middle, and the end of the
barcode are only long, if the barcode is printed with a readline.
Always long
The separation bars at the beginning, middle, and the end of the barcode are
always long, regardless if the barcode is printed with or without readline. The
position of the barcode is the same as with the readline option switched on.
Dispense Mode
64-xx
ALX 92x
DPM
Governs the run of the print-dispense procedure.
Only if
SYSTEM PARAMETER
> Periph. device
= „Tear-off edge“.
The ribbon autoeconomy function can only be used in "Real 1:1 Mode"!
Dispense only
With this setting, the printer can be used as a mere dispenser without pro-
cessing print jobs. Set the material length before you use this function.
See parameter
PRINT PARAMETERS > Material length
.
After calling "Dispense only", the printer restarts; afterwards, the following is
displayed:
Dispense only
Labels 0
0 = Number of dispensed labels.