06/15 Rev. 6.00-02
USER- / SERVICE MANUAL
Info-Printouts & Parameters
64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
66
WLAN SSID
64-xx
ALX 92x
DPM
PEM
ALX 73x (PMA)
Only with plugged-in WLAN CF-card
A Service Set Identifier (SSID) is the identification of a radio frequency net-
work, which is based on IEEE 802.11.
Each WLAN owns a configurable SSID, by which the network is identified.
The SSID is the name of the network.
The SSID character string is configured in the base station (Access Point) of
the WLAN. It must be also configured on all clients, which are supposed to
access the access point. The SSID is attached uncoded to all pakkets to
identify them as part of that network.
xxxxxxxxxxx…
The SSID consists of a maximum of 32 alphanumeric characters. Default set-
ting: „avery“
Detailed information about using the WLAN feature: read the user manual,
topic section
Advanced Applications
.
WLAN WEP
64-xx
ALX 92x
DPM
PEM
ALX 73x (PMA)
Only with plugged-in WLAN CF-card
WEP („Wired Equivalent Privacy“) is an encryption scheme for WLAN.
Off
(Default setting) Communication with the host is
not
encoded.
64Bit key
Communication with the host is encoded using 64 Bit WEP encoding.
128Bit key
Communication with the host is encoded using 128 Bit WEP encoding.
Detailed information about using the WLAN feature: read the user manual,
topic section
Advanced Applications
.
WLAN default key
64-xx
ALX 92x
DPM
PEM
ALX 73x (PMA)
Only with plugged-in WLAN CF-card
Selection of the encryption key, which is used for packet transmission.
x
Setting range: 1-4; Default setting: 1
Detailed information about using the WLAN feature: read the user manual,
topic section
Advanced Applications
.
