Novexx Solutions 64-04 Page 346 User Manual Download

Page: 346 / 438

06/15 Rev. 10

USER + SERVICE MANUAL

/Status Reports

64-xx – DPM – PEM – ALX 73x (PMA) – LPA 81x (Printer) – ALX 92x – AP 5.4 – AP 5.6

9117 Device

Unknown

Status

Occurs during a firmware update, if the device information in the header is
missing.

Measure



Switch printer off and on again. Check the configuration.

9118

H8 Update Fail.

Status

The update of a H8 device failed.

Measure



Switch printer off and on again.

9119 H8

missing

Status

Occurs during a firmware update of a H8 device, if no such device was
found.

Measure



Check the configuration.

The status message is cancelled automatically. The download continues.

9122 Checksum

error

Status

Checksum error while loading a firmware file. The checksum of the loaded
data doesn´t match the calculated checksum.

Measure



Repeat the download.



If the error continues to occur, the file is probably damaged or corrupted.

Check/ exchange the firmware file.

9123 Memory

unavailable

Status

Error while loading a firmware file. There is not enough free memory
available.

Measure



Restart machine and repeat the download.



If the error continues to occur: Reduce the memory which is assigned by

the following parameters:

SYSTEM PARAMETERS

> Ram disc size

SYSTEM PARAMETERS

> Font downl. area

SYSTEM PARAMETERS > Free store size

Summary of Contents for 64-04























































































































































































































































































































































































































































Search results

Summary of Contents for 64-04

Reviews:

Related manuals for 64-04

Brands by name

Popular brands

Novexx Solutions 64-04, User Manual

Search results

Summary of Contents for 64-04

Reviews:

Related manuals for 64-04

Brands by name

Popular brands