06/15 Rev. 6.00-02
USER- / SERVICE MANUAL
Info-Printouts & Parameters
64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
103
Position timeout
ALX 92x
DPM
Only with an AI installed.
Not
with
APPLICATOR PARA > Applicator type
= „ASA“, „Direkt Spenden“,
„LA-BO“.
Sets the delay time, after which a position error of the applicator is displayed
as an error. A position error occurs, if the applicator doesn´t reach any of its
end positions within the required time frame.
xxxxx ms
Setting range: 500 to 99999 ms; Unit interval: 1 ms;
Default setting: 2000 ms
Off
Set x<500 to disable the function.
Lab release time
ALX 92x
DPM
Only with an AI installed.
Not
with
APPLICATOR PARA > Applicator type
= „ASA“.
Required setting:
APPLICATOR PARA > Application mode
= „After printing“
Defines a delay between the dispensing and the start of application of the la-
bel.
xxxx ms
Setting range: 1-99999 ms; Unit interval: 1 ms; Default setting: 0 ms
Touch down sens.
ALX 92x
DPM
Switching behaviour of the touchdown sensor.
Only with an AI installed.
Only visible with certain applicator types.
Pulse falling
The
falling
signal edge at the sensor triggers the touchdown trigger event
Pulse rising
The
rising
signal edge at the sensor triggers the touchdown trigger event