06/15 Rev. 6.00-02
USER- / SERVICE MANUAL
Info-Printouts & Parameters
64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
118
MLI PARAMETERS
Novexx Solutions‘ MONARCH LANGUAGE INTERPRETER™ (MLI™) helps
you use an AP 5.4, 64 xx, ALX 92x, DPM or PEM printer which was set up for
use with ZIH Corp.’s ZPL II®
1)
. If you have any questions about using an
Novexx printer with these data streams, please contact Service.
This section lists the ZPL II® commands that the Novexx Solutions printer's
MONARCH LANGUAGE INTERPRETER™ can interpret with any special
notes, if applicable.
This menu appears only with
SYSTEM PARAMETER > Print Interpret.
set to „MLI“
or „EasyPlug / MLI“.
MLI is not supported in Standalone Mode.
Recommended settings:
SYSTEM PARMETER > RAM disk size
at least 2048 Kbytes
SYSTEM PARAMETER > Free store size
at least 2048 Kbytes
Darkness
64-xx
ALX 92x
DPM
PEM
ALX 73x (PMA)
Print contrast for MLI printjobs. This setting is modified by printjobs which
contain print contrast information. The print contrast set by
SYSTEM PARAMETERS > Print contrast
is not influenced by this setting.
xx
Setting range: 0-30; Step width: 1; Default setting: the Easy-Plug setting is
overtaken.
Control Prefix
64-xx
ALX 92x
DPM
PEM
ALX 73x (PMA)
Indicates the start of a MLI control instruction.
xxH
Default: xx = 7E (0x7E = „Tilde“)
Format Prefix
64-xx
ALX 92x
DPM
PEM
ALX 73x (PMA)
Indicates the start of a MLI format instruction.
xxH
Default: xx = 5E (0x5E = „Caret“)
1) ZPL II is a registered trademark of ZIH Corp. ZIH Corp. and Novexx Solutions are not related in
any way, and ZIH Corp. has not licensed or otherwise sponsored Novexx Solution‘s MONARCH
LANGUAGE INTERPRETER™. MONARCH®, MONARCH LANGUAGE INTERPRETER, MLI
are trademarks of Paxar Americas, Inc.
