06/15 Rev. 6.00-02
USER- / SERVICE MANUAL
Info-Printouts & Parameters
64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
75
[16] Dot check area (=Dottestarea) of the printer (schematic).
Dottestarea to
64-xx
ALX 92x
DPM
PEM
Only if
SYSTEM PARAMETER > Autom. dot check
= „Continuous“.
Upper border of the dot check area. The value sets the distance in mm to the
left print head end, looked at on the print head from above.
x mm
Setting range: refer to Tab. 3; Unit interval: 1; Default setting: 0 mm
Print Interpret.
64-xx
ALX 92x
DPM
PEM
ALX 73x (PMA)
The printer uses the MONARCH LANGUAGE INTERPRETER™ to inter-
prete and process data.
Easyplug
Printjobs written in the Easy-Plug command language can be interpreted.
Lineprinter
Lineprinter (or similar to Lineprinter), print-out of the print command.
Hex Dump
Print-out in hexadecimal format.
In Lineprinter and Hex Dump, commands are printed out in the form of a list
with the character set 12.
When setting Lineprinter or Hex Dump, Easy Plug commands which have
not yet been processed are deleted!
0m m
128 m m
von
from
bis
to
printhead
Dottestbereich
Dottestarea
Display 2x16
characters
