06/15 Rev. 04
USER MANUAL
Advanced Applications
AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t – 64-xx – DPM – PEM – ALX 92x
10
Features
Standalone operation in brief:
• Printing without computer connection
• Data entry via control panel or keyboard
• Reading print job from the memory card
• Entry or selection of field content
• Updating Firmware from memory card
Selecting files from memory card
Requirements
The card slot which is used for standalone operation must provide the drive letter C.
64-xx, DPM, PEM, ALX 92x
1
:
Set
INTERF.PARAM. > DRIVEASSIGNMENT > Drive C
to „Compact flash“ or „Compact
flash 2 “ („Compact flash 2“ appears only with the optional 2
nd
card slot).
AP 5.4 Gen. 2, AP 5.6:
Set
INTERF.PARAM. > DRIVEASSIGNMENT > Drive C
to „SD/MMC card“ (= factory set-
ting).
Other printers: No settng required
Selectable are files with the following extentions:
• „*.FOR“ (printjob)
• „*.S3B“ (firmware)
The files must be stored on memory card in folder
\FORMATS
.
If no file with one of the above listed endings is found in folder
\FORMATS
, or if no
memory card is inserted, the following message appears:
If a huge amount of printjob files is stored in folder
\FORMATS
, this can lead to the
following status message:
To remedy the cause of this message, take one (or both) of the following measures:
• Reduce the number of files in the
\FORMATS
folder
• Increase the amount of assigned memory in
SYSTEM PARAMETER > Free store size
Selecting a file
1. Press the
Esc
buttons to get into the standalone mode. The following is
displayed:
„Novexx.for“ stands for any printjob file, which is stored in the
\FORMATS
folder.
Assumption: More than one file is stored in the
\FORMATS
folder: In this case the
first file in alphabetical order is displayed.
2. Press the
Cut
or
Feed
button
to step to the next file.
Press the
Esc
button
to jump back to the first entry of the list.
1) With firmware version 5.32 or higher (each Gen. 3)
Standalone
No files!
Status num: 8857
Wrong mem config
Choose a file
Novexx.for
