3
[To prevent injury, note the following]
[Additional instructions]
CAUTION
●
Only the power/signal specified in the Instruction Manual should be applied to each terminal.
Otherwise, it may cause an electric shock, fire, injury, etc.
●
Connect cables to the correct terminals. Otherwise, a burst, damage, etc., may occur.
●
Ensure that polarity (+/-) is correct. Otherwise, a burst, damage, etc., may occur.
●
The servo amplifier heat sink, regenerative resistor, servo motor, etc., may be hot while the power is
on and for some time after power-off. Take safety measures such as providing covers to avoid
accidentally touching them by hands and parts such as cables.
The following instructions should also be fully noted. Incorrect handling may cause a malfunction, injury, electric shock, fire,
etc.
