6 SERVO MOTOR DRIVING
6.2 Point table mode (pt)
139
6
■
At clear input
When Control DI3 bit 11 (C_CR) is input, the remaining distance is cleared and the target position of the point table is
displayed again at the command position.
At restart, the current position and command position start from 0.
Position data unit
The display unit is displayed as the unit set in [Pr. PT01], and the feed length multiplication is displayed as the unit set in [Pr.
PT03].
When the unit is set to degrees, the roll feed display function is disabled.
Refer to Page 98 About point table mode (pt).
0 r/min
Controlword bit 4
(New set-point)
Target point table
INP/S_INP
ON
OFF
ON
OFF
Controlword bit 8 (Halt)
ON
OFF
ON
OFF
0
1
0
0
10.00
10.00
0
5.90
0
6.50
0
6.50
0
5.90
10.00
Control DI3 bit 11
(In-position)
Quick stop by Clear
Forward
rotation
Servo motor speed
Reverse
rotation
Current position
Command position
Remaining distance clear
Update the display from 0 by the next Start
