9 MANUFACTURER FUNCTIONS
9.6 Override
249
9
• When [Pr. PT42] is set to 50 and [Pr. PT43] is set to 5 in the station jog operation
*1 In jog operation mode, when Controlword bit 4 (New set-point) is turned on/off with 0% digital override, and then if the digital override is
changed to a value other than 0%, even if Controlword bit 4 is off, the servo motor will stop at the closest station.
*2 Changing the digital override to 0% during operation will cause deceleration to a stop. Then, if the digital override is changed to a value
other than 0%, the jog operation will start again. At this time, even if Controlword bit 4 is off, the servo motor will stop at the closest
station.
ON
OFF
ON
OFF
ON
OFF
ON
OFF
1
2
2
3
4
5
6
7
8
*2
*1
0 r/min
Control DI8 bit 3 to bit 6
Status DO5 bit 6
(S_MEND)
Point actual value
Controlword bit 4
(New set-point)
8
1
2
Power supply
All turned off
All turned off
Digital override 100 %
Digital override 85 %
Forward
rotation
Servo motor speed
Reverse
rotation
Current station position
5 ms or
longer
Digital
override 0 %
Digital
override 100 %
Digital
override 0 %
Digital override 85 %
Digital override 50 %
(S_OV0 to S_OV3)
ALM (Malfunction)
Digital override 50 %
