Mitsubishi Electric MELSERVO-MR-J4 GF Series, Instruction Manual

Page: 131 / 308

6 SERVO MOTOR DRIVING
6.2 Point table mode (pt)
129
6
• Varying-speed operation by incremental value command method
Example. Operations when "10" is set to the auxiliary function of point table No. 3
Operation sequence
1.
Starting with point table No. 1
2.
Varying the speed and executing point table No. 2
3.
Varying the speed and executing point table No. 3
4.
Varying the speed, and executing point table No. 1 when "10" is set to the auxiliary function of point table No. 3
5.
Repeating the above execution in the sequence of 1) to 2) to 3) to 4) to 2) to 3) to 4)
*1 "Point actual value" is not outputted in automatic continuous operation.
Point table No. Position data
[10
STM
μ m]
Servo motor
speed [r/min] Acceleration
time constant
[ms] Deceleration
time constant
[ms] Dwell [ms] Auxiliary
function
1 5.00 3000.00 100 150 0 3
2 10.00 2000.00 150 200 0 1
3 5.00 1000.00 300 100 0 10
5.00
0 5.00
1)
2)
2)
3)
4)
10.00 15.00
5.00 5.00
1
0 r/min
Target point table
ON
OFF
Point actual value
*1
ON
OFF
ON
OFF
ON
OFF
Controlword bit 4
(New set-point)
INP/S_INP
Status DO 5 bit 5
Status DO 5 bit 6
Acceleration time constant of
point table No. 1 (100)
Deceleration time constant of
point table No. 1 (150)
Point table No. 1
Point table No. 2
Point table No. 3
Speed
(3000.00) Speed
(2000.00) Speed
(3000.00)
Forward
rotation
Speed (1000.00)
Servo motor speed
Speed
(2000.00)
Reverse
rotation
Point table No. 1 Deceleration time
constant of
point table No. 1 (150)
Point table No. 2
Acceleration time
constant of point table
No. 1 (100)
Position address
(In-position)
(S_CPO (Rough match))
(S_MEND (Travel completion))