4 STARTUP
4.5 Test operation mode
51
4
Operation procedure
■
Test operation mode via USB connection
1.
Turn off the power.
2.
Set SW1-1 to "ON (up)" and SW1-2 to "OFF (down)".
The test operation mode is not enabled when switches SW1-1and SW1-2 are set during power-on.
3.
Turn on the servo amplifier.
When initialization is completed, the decimal point on the first digit blinks as follows.
If an alarm or warning occurs during the test operation, the decimal point on the first digit also blinks as follows.
4.
Start operation with the personal computer.
1
ON
2
1
ON
2
Set SW1-1 to "ON (up)" and SW1-2 to "OFF (down)".
After 1.6 s
Blinking
After 0.2 s
After 0.8 s
After 0.8 s
Blinking
Blinking
After 0.2 s
