The DSP Toolchest
429
The overall gain through the process block is automatically adjusted so that a full-scale input signal
creates a full-scale output. When the input signal is below the specified
Threshold
, the output
signal is just the input signal with the over-all gain applied, and no additional non-linearity.
MIOSoftClip(3) is useful for applying soft saturation in signal processing loops (for example, inside
a feedback delay line). It is also useful for saturating the output of other processors like the MIO
Compressor and MIO Limiter.
Parameters:
Threshold
[0, 4] samps
Threshold at which the saturation begins to be applied.
Master Bypass
{On, Off}
Disables the saturation and passes the signal through untouched.
See also:
,
MIOSoftDistortion Type 1
• Synopsis: Type 1 Soft Distortion Generator
• Category: Distortion, Building Blocks
• Channels: 1
Description:
When the the absolute value of the input signal level reaches the specified
Threshold
(on a
sample by sample basis), Metric Halo Type 1 distortion is generated and sent to the output. This
signal may be added to the input to generate the same effect as the Type 1 soft clipper. The point
of this signal processing module is to allow you to further process the distortion signal before
adding it back into the original signal.
Parameters:
Threshold
[0, 4] samps
Threshold at which the saturation begins to be applied.
Master Bypass
{On, Off}
Disables the distortion generator and causes the output to be zero.
See also:
,
MIOSoftDistortion Type 2
• Synopsis: Type 2 Soft Distortion Generator
• Category: Distortion, Building Blocks
• Channels: 1
Description:
