Metric Halo 3d Upgrade Board Set Page 293 User Manual Download

Page: 293 / 527

The MIOConsole3d Application

293

The 3d Domain

after all a fully-functional hardware digital mixing/routing/processing environment - the

only difference is you are controlling the hardware mixer with a computer UI (MIOConsole3d, with maybe

a control surface or two).

The above connection model applies to as many boxes as you have in your MHLink domain. If you have

four boxes on MHLink, you can do stuff like this:

Host Computer

MHLink box 1

MHLink box 2

MHLink box 3

MHLink box 4

Windows 10 PC

(Pyramix, Sound Forge…)

iPad/Android

beatbox

Linux PC

(MixBus32c, Reaper…)

Mac SCP slave

(EZdrummer, Kontakt…)

MHLink Gigabit Ethernet

SCP USB

Note:

Changes to the USB port

sample rate or channel count

will physically reset the USB port

and may require re-connecting

the satellite audio software

Figure 10.144: 4-box MHLink domain with four Satellite computers

Each satellite computer will show up as the SCP USB connections of the box to which it is attached - the

Win 10 PC on box 1 SCP USB, Linux on box 2, iOS on box 3, etc.

Input (Source) Selector

Output (Destination) Selector

Filter selection to “SCP”

Port channel selector

#2 ULN-2: USB ch 6

“Cascade” to apply routing across

a range of consecutive strips

Unit selection to “box #2”

(optional) Input and Output set to the

same channel for ease of navigation

Figure 10.145: SCP USB Source and Destination routing

When assigning routes to and from USB ports, it is highly recommended to filter the routing UI to the de-

sired 3d Unit in both the Source (input) and Destination (output) routing windows. It is easy (and frustrating)

to be moving quickly and assign a Send to one box and the Return from a different box.

Further filtering by selecting “SCP USB” is helpful to keep scrolling through the lists at a minumum.

A few real-world things to keep in mind with SCP USB connections…

Summary of Contents for 3d Upgrade Board Set















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3d Upgrade Board Set

Reviews:

Related manuals for 3d Upgrade Board Set

Brands by name

Popular brands

Metric Halo 3d Upgrade Board Set, User Manual

Search results

Summary of Contents for 3d Upgrade Board Set

Reviews:

Related manuals for 3d Upgrade Board Set

Brands by name

Popular brands