The MIOConsole3d Application
266
Mixer Strip: ‘Pre- and Post-Insert Direct Outs’, ‘Insert’ processor slots, ‘Aux Sends’
This section is concerned primarily with routing options from the Mixer Strip and processing within the
Mixer Strip.
Figure 10.111: Pre-Insert Direct Out, Inserts, Post-Insert Direct Out, and Aux sends
Direct Outs
Both Pre-Insert and Post-Insert Direct Outs are available on all Input strips, placed above and below the
“Inserts” section per their locations in the signal path. Direct Outs can send to any available output port
in the Domain - hardware, Host, or SCP.
The
Pre-Insert Direct Out
sends signal from the mixer strip prior to Insert processing.
Inserts
DSP processing
Inserts
are available on all Input and Bus strips.
Clicking in the Inserts section opens a dialog box that lists categories for "Plugin", "Macro", "Graph"
and "I/O", with "None" listed at the top. When you open an existing Insert plug-in, clicking “None” will
delete it.
Selecting one of the listed categories will reveal the nested contents of that category. Selecting a nested
item will in turn reveal a list of ‘saved preset’ categories pertaining to that item, whether it be a processor,
macro or Graph. Selecting a preset category will in turn reveal all the saved presets within that category,
as shown in the graphic below.
Figure 10.112: Insert selection categories with nested ‘Saved Presets’ hierarchy
