The MIOConsole3d Application
219
•
Fit Tracks Vertically
(default:
⌥X
) is a toggle control which will vertically squeeze all tracks in the
Session overview into the available space of that window. If you’ve got a lot of tracks in there, they’re
going to be tiny, but they will only squeeze down to the point you can still read the channel name.
Toggling ‘Fit Tracks Vertically’ off again will return to your previous vertical zoom view.
Figure 10.42: Session overview: ‘
Fit Tracks Vertically
’ (minimum view)
The screenshot above shows tracks squished to their minimum height.
Note towards the upper right above the Track List, the widget bar ‘Fit Tracks Vertically’ button
(circled in red) is colored blue, indicating it is enabled.
•
Zoom Tracks In Horizontally
(default:
⌘→
) does pretty much just that. If the Overviews display is
actively recording or playing with
Autoscroll Recorded Into View
, this command will zoom in towards
the playhead at the right of the Overview. In all other conditions,
Zoom Tracks In Horizontally
will
focus towards the beginning of the audio file at the left edge of the Overviews window.
•
Zoom Tracks Out Horizontally
(default:
⌘←
) zooms the tracks out as you would expect, centered on
the current playhead position.
•
Fit Tracks Horizontally
is another toggle control which, when enabled, zooms out to show the entire
length of all sound files in the current Session timeline.
Like it's vertical ‘Fit Tracks’ counterpart above, ‘Fit Tracks Horizontally’ has a widget bar control
above the Tracks List which turns blue when engaged, and when disengaged will return you to your
previous horizontal zoom view.
•
Autoscroll Recordhead into view
will draw the recorded waveforms all the way to the right edge of
the current overview window, and then auto-scroll the waveforms back when it reaches the edge.
This mode always shows the most recently recorded audio in the Overview.
•
Autozoom Tracks Horizontally
zooms out automatically as you record, so the right edge of the time-
line stays at 00:00:00.00, and the Recordhead is at the far left of the Tracks Overview. In this mode,
all takes in the Session are always visible within the Tracks Overview window.
