Metric Halo 3d Upgrade Board Set Page 90 User Manual Download

Page: 90 / 527

2882 Quick Start Guide

Analog

1-8

Cans

L/R

Digital

L/R

Digital

L/R

Digital

L/R

Digital

L/R

ADAT 1-8

Toslink 1-2

ADAT 1-8

Toslink 1-2

Green

: Routable Inputs

Red

: Routable Outputs

Analog

1-8

Figure 4.2: 2882 Routing

Connect the 2882

Install the latest MIOConsole3d installer package from:

macOS MIOConsole3d installers

(this will require

a restart). Please see the section on

software installation

if you need clarification.

Driver Installation on macOS 10.13 and newer

With High Sierra (macOS 10.13) Apple introduced another layer of driver (system extension)

software security.

In order for third-party drivers (system extensions) to be activated on new installs of High Sierra,

the user of the computer (you) must explicitly approve the activation, after the installation has

occurred.

You must do this before you will be able to use your hardware via MHLink.

The authorization process is the same for all third-party drivers. If you are unfamiliar with the

process, please read our FAQ answer here:

macOS Driver User Authentication

Additionally, with macOS 10.14 and 10.15, you must select “Yes” when asked to give

MIOConsole3d permission to access the “Microphone”. If in doubt, double-check this setting:

go to the Apple menu: System Preferences.../Security & Privacy pane, select “Microphone” in

the column to the left, and make sure that MIOConsole3d is checked.

Summary of Contents for 3d Upgrade Board Set















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3d Upgrade Board Set

Reviews:

Related manuals for 3d Upgrade Board Set

Brands by name

Popular brands

Metric Halo 3d Upgrade Board Set, User Manual

Search results

Summary of Contents for 3d Upgrade Board Set

Reviews:

Related manuals for 3d Upgrade Board Set

Brands by name

Popular brands