The MIOConsole3d Application
227
erally the root box bears the biggest load since it manages the traffic between the Host computer
and all the other boxes, but you can help manage that load a bit by keeping the following in mind:
1. DSP processes assigned within a single Mixer strip will be assigned to the same box, so if you
have a ton of insert processes running on one particular strip, that process load will not be shared
across boxes.
2. Processing on signal paths routed to a physical output port rather than a bus - Monitor Controller
and Cue Controller Graph, etc. - gets assigned to the 3d box connected to the physical output
of that path. So, if you have a 6-channel surround MC output with room correction, delay and
EQ in the DSP Graph going to the analog outputs on box #3, that DSP Graph processing will
be executed on box #3.
