Metric Halo 3d Upgrade Board Set Page 144 User Manual Download

Page: 144 / 527

ULN-2 Users Guide

144

• Enhanced processing power and massive hardware memory. All 3d hardware includes over a hun-

dred DSP plug-ins and the unique Metric Halo Graph environment within the 3d mixer.

• 128 input x 64 bus (at all sample rates) multi-box unified zero-latency mixer

• 1024 x 1024 internal audio routing matrix (per box)

• Front Panel Metering for Analog Inputs and Outputs

• Full console metering of every channel and mix bus

• Total recall of every console parameter

• Portable Capabilities – Battery Powerable

• Rack Mount Kit

Optional (can be installed before or after purchase)

• 1 or 2 channels of Jensen input transformers

What you need to use it

• Computer:

• Any Mac that supports Mac OS X 10.8.5 with a Gigabit Ethernet or UAC2 class-compliant USB

connection

• Mac OS X 10.8.5 or newer required

• Mac OS X 10.11.5 or newer recommended

• Peripheral Gigabit Ethernet Adaptors supported:

• Apple Thunderbolt Gigabit Ethernet Adapter

• PCIe Gigabit Ethernet Adapter (Intel i210 chipset is known to work)

• Third-party Thunderbolt Gigabit Ethernet Adapter (e.g. as part of a dock)

• USB3 Gigabit Ethernet Adapter

• Software: All CoreAudio compliant software is compatible with Mobile I/O, including:

• Cubase

• Digital Performer

• GarageBand

• iTunes

• Live

• Logic

• Nuendo

• Pro Tools

• Studio One

• Reaper

• MixBus / Ardour

Summary of Contents for 3d Upgrade Board Set















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3d Upgrade Board Set

Reviews:

Related manuals for 3d Upgrade Board Set

Brands by name

Popular brands

Metric Halo 3d Upgrade Board Set, User Manual

Search results

Summary of Contents for 3d Upgrade Board Set

Reviews:

Related manuals for 3d Upgrade Board Set

Brands by name

Popular brands