Metric Halo 3d Upgrade Board Set Page 425 User Manual Download

Page: 425 / 527

The DSP Toolchest

425

Invert

{Off, On}

When enabled, inverts the delayed signal relative to the input polarity.

Enable

{Off, On}

Enable the tap. When enabled, the tap generates output from on its dedicated output port

and contributes to the summed output.

Delay(samp)

[0, 1.023k] samps

Sets the delay, in samples, between the input and output of this tap.

Gain

[-160, 10] dB

Sets the gain of the delayed signal.

Invert

{Off, On}

When enabled, inverts the delayed signal relative to the input polarity.

Enable

{Off, On}

Enable the tap. When enabled, the tap generates output from on its dedicated output port

and contributes to the summed output.

Delay(samp)

[0, 1.023k] samps

Sets the delay, in samples, between the input and output of this tap.

Gain

[-160, 10] dB

Sets the gain of the delayed signal.

Invert

{Off, On}

When enabled, inverts the delayed signal relative to the input polarity.

Enable

{Off, On}

Enable the tap. When enabled, the tap generates output from on its dedicated output port

and contributes to the summed output.

Delay(samp)

[0, 1.023k] samps

Sets the delay, in samples, between the input and output of this tap.

Gain

[-160, 10] dB

Sets the gain of the delayed signal.

Invert

{Off, On}

When enabled, inverts the delayed signal relative to the input polarity.

Master Bypass

{On, Off}

Summary of Contents for 3d Upgrade Board Set















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3d Upgrade Board Set

Reviews:

Related manuals for 3d Upgrade Board Set

Brands by name

Popular brands

Metric Halo 3d Upgrade Board Set, User Manual

Search results

Summary of Contents for 3d Upgrade Board Set

Reviews:

Related manuals for 3d Upgrade Board Set

Brands by name

Popular brands