DSP Implementation Guide
369
target. When you have made a valid connection, the connection line will switch from Gray to Green. You
can make as many mults as you like of a signal source but only one connection can be made to a processor
input or process bus port. If you make a new connection to an input that already has a connection, the old
connection will be automatically disconnected. To remove a connection without establishing a new one,
⌃
(Control)-click on the input port to which the connection is made.
Figure 13.22: Starting a Connection
Figure 13.23: Completing the Connection
Figure 13.24: Making a Mult
After everything is placed and wired up, you will need to ensure that you have routed the output of your
signal processors to the appropriate port on the output side of the graph. When you are done, you will
have a complete graph. For example:
Figure 13.25: Connecting the Output
