The MIOConsole3d Application
270
Mix Desk Fader
The
Fader
adjusts the output level of the strip to its assigned bus. Fader maximum output gain is +10dBFS,
0.0dBFS is digital unity (no gain stage processing applied), and setting the Fader to minumum outputs
digital zero from that strip (i.e.: no audio data - not even dither).
Fader Meter
The
Fader Meter
shows the Post-Insert signal level. Default meter readout is pre-Fader, and can be changed
to show post-fader signal using the menu bar “Mixer” menu: “Input Strip Meters Post-Fader” command,
or (Command-Shift-P).
Record Enable
Record Enable
becomes active on a mixer strip
ONLY
when “To Host”, or a “Direct Out” (or both) is routed
back to the Host computer. This is because Session audio files are stored on the Host computers‘ drives.
Click on ‘Record Enable’ to enter ‘Record Armed’ mode, indicated by the button turning red. Audio from
this strip will now be captured when “Record Start” is triggered in the Record Panel.
Note that in MIOConsole3d, many Fader section controls are duplicated in the Session Track
headers, making it possible to control many aspects of a capture-on-the-fly mix without having
to swing back to the main Mixer desk:
Figure 10.116: Mixer Strip controls also found in Session Track headers
