The MIOConsole3d Application
230
•
Show/Hide Cue Controller
shows/hides the Cue Controls window.
•
Add Cue Controller
adds a new Cue Controller to the Cue Controls stack ready to be configured.
•
Add Monitor Source
opens a window where you can name, select input routes, and set trims, gain
offsets and channel configurations for a new Monitor Controller source.
Figure 10.58: Monitor Source routing window
The checkbox “Set input mode and gain when selecting this source” allows you to configure the
physical input when you select this input. For instance you could use this to, say, switch between the
‘Line +4’ and the ‘Mic S/R’ inputs on a ULN8 depending on your MC Source selection.
The “Set Clock Source to:” checkbox lets you switch the Domain clock source to the selected digital
input, useful for connecting a wild digital input from a CD, DAT or other digital device which can not
be clocked to the MHLink Domain. Switching to another Monitor Source resets the domain clock
to it’s original state.
•
Add Monitor Output
opens a window where you can name the new output, select output destina-
tions, trims, output mode, gain offsets, delay offsets and channel configurations for a new Monitor
Controller Output.
Figure 10.59: Add Monitor Output window
