The MIOConsole3d Application
252
•
Cue Controller:
• Cue Controller is visible
• Cue Controller Source: stereo, ’MC Source’ (Cue source follows Monitor Controller source selec-
tion)
• Talkback Source: unassigned (which is why the "Talkback" trigger button is grayed out)
• Cue Controller Graph: passthrough
• Cue Controller Output: stereo, assigned to box #1 headphone output L/R
Note: Since ULN-2s have dedicated a stereo Monitor route which goes to both the front panel
headphone jack and stereo TRS monitor outs on the back panel, only a default Monitor Controller
output is established. The default Cue Controller for a new ULN-2 root box is unconfigured.
Mixer Desk Default configuration: When you add a new box
If the new box is an addition to an existing Domain, a mono analog Input strip will be created for each
analog input channel on that box (eight strips for a 2882, LIO-8 or ULN-8, two strips for a ULN-2). New
strips created by adding a new box will always appear at the far right of the existing Mixer desk.
These new Input strips will include Pre-Insert “To Host“ returns and will be routed to the current Main mix
bus. Default Input strips are always mono, panned to center and are muted for safety at the Fader stage.
