8-169
Disassembly
The illustrations are base on the type 1.
Apply pressure on spring (3) with a press.
The spring is under a large installed load.
This is dangerous, so be sure to set
properly.
Remove bolt (7), spring washer (8) and
lock plate (6).
Remove lock nut (5).
Take enough notice so that the press
which pushes down the spring, should
not be slipped out in its operation.
Lighten the press load slowly and remove
bracket (4) and spring (3).
1
12
13
4
7, 8
6
5
Press
3
1
11
10
9
(2)
Remove rod seal (9), back up ring (10)
and dust seal (11).
刴
Remove rod (12) from body (1).
Remove grease valve (13) from rod (12).
刲
刳
侍
刮
侍
刯
到
刱
130ZF8UC31
130ZF8UC32
130ZF8UC33
Summary of Contents for HX140L
