![background image](http://html.mh-extra.com/html/hyundai/hx140l/hx140l_manual_2196330474.webp)
6-39-3
3. BATTERY CHARGING WARNING LAMP LIGHTS UP (Starting switch : ON)
余
Before disconnecting the connector, always turn the starting switch OFF.
余
Before carrying out below procedure, check all the related connectors are properly inserted.
余
After checking, insert the disconnected connectors again immediately unless otherwise specified.
Cause
Remedy
Defective MCU
Disconnection in
wiring harness or
poor contact
between CN-51
(15)-CN-2 (18)
Disconnection in
wiring harness or
poor contact
between CN-2 (18)
alternator [CN-74
(2)]
Defective alternator
Replace
Repair or replace
(after clean)
Repair or replace
(after clean)
Replace
YES
YES
YES
NO
NO
NO
15
CN-51
18
CN-2
ALTERNATOR
CN-74
B+
L
G
~
3
U
P
1
2
FI
NC
ALT VOLTAGE
UNITED MCU
Engine : Running
Voltage : 20~32V
Check voltage
between alternator
CN-74 (2) and
chassis
Check voltage
between CN-2
(18) and chassis
Check voltage
between CN-51
(15) and chassis
140L6ES104
Voltage : 20~32V
Voltage : 20~32V
YES
NO
20~32V
0V
Check voltage
(SERIAL NO. : #0611-)
Summary of Contents for HX140L
