Hyundai HX140L, Manual

Page: 720 / 819

8-94
3. OUTLINE OF DISASSEMBLING
GENERAL SUGGESTIONS
Select a clean place for dismantling.
Spread a rubber plate on a working table in order to prohibit the damage of parts.
Clean a deceleration equipment and a motor part, washing out dirt and unnecessary substances.
Without any damage of O-ring, oil seal, the adhered surface of other seals, a gear, a pin, the
adhered surface of other bearings, and the surface of moisturized copper, treat each parts.
Numbers written in the parenthesis, ( ), next to the name of a part represent the part numbers of
a cross-sectional view annexed with a drawing.
The side of a pipe in a motor can be written as a rear side; the side of out-put as a front side.
Using and combining a liquid gasket, both sides must be dried completely before spraying a liquid
gasket.
In case of bonding volts, combine a standard torque by torque wrench after spraying loctite 262
on the tab parts. (It can be dealt as assembling NPTF screws and an acceleration equipment.)
1)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
3.1 DISASSEMBLING
Unloosing wrench bolt and disassemble
cover (37).
Wrench bolt = M12
佴
40L-8 EA
(purchasing goods)
1)
侍
21078TM21
Disassemble parts related to counterbalance
valve. 2)
21078TM22