7-28
7. TURNING JOINT
Maintenance standards
Remedy
Plating worn or peeled due to seizure or contamination.
½
Worn abnormality or damaged more than 0.1 mm
(0.0039 in) in depth due to seizure contamination.
½
Damaged more than 0.1 mm (0.0039 in) in depth.
½
Worn more than 0.5 mm (0.02 in) or abnormality.
½
Worn less than 0.5 mm (0.02 in).
½G
Damage due to seizure or contamination remediable
within wear limit (0.5 mm) (0.02 in).
½
Worn more than 0.5 mm (0.02 in) or abnormality.
½
Worn less than 0.5 mm (0.02 in).
½G
Damage due to seizure or contamination remediable
within wear limit (0.5 mm) (0.02 in).
½
Extruded excessively from seal groove square ring.
½G
Slipper ring 1.5 mm (0.059 in) narrower than seal
groove, or narrower than back ring.
½
Worn more than 0.5 mm (0.02 in) ~ 1.5 mm (MAX.)
(0.059 in)
Sliding surface with
sealing sections.
Sliding surface
between body and
stem other than
sealing section.
Sliding surface
with thrust plate.
Sliding surface
with thrust plate.
-
-
-
Replace
Replace
Smooth with oilstone.
Replace
Smooth
Smooth
Replace
Smooth
Replace
Replace
Replace
Replace
Part name
Body,
Stem
Cover
Seal set
Square ring
Extrusion
1.5mm (max.)
(0.059 in)
Summary of Contents for HX140L
