5-23
5-23
J1939 Code
Description
Effect and Action
29-4
Accelerator Pedal Position 2 : Voltage
Below Normal (Engines equipped
with an analog throttle)
The ECM detects one of the following conditions:
The ECM has been powered for 3 seconds.
Diagnostic code 168-4 is not active.
3510 (2131) codes are not active.
The setting for the lower diagnostic limit has been
exceeded for one second.
If equipped, the warning lamp will come on. The diagnostic
code will be logged.
Analog Throttle Position Sensor Circuit - Test
29-4
Accelerator Pedal Position 2 : Voltage
Below Normal (Engines equipped
with a digital throttle)
The ECM detects the following conditions:
The ECM has been powered for 3 seconds.
Diagnostic code 168-4 is not active.
There are no active 678 or 41 codes.
The setting for the lower diagnostic Iimit has been
exceeded for one second.
If equipped, the warning lamp will come on. The diagnostic
code will be logged.
Digital Throttle Position Sensor Circuit - Test
29-8
Accelerator Pedal Position 2 :
Abnormal Frequency,
Pulse Width or Period
The ECM detects the following conditions:
The signal frequency from the digital throttle position sensor
is equal to 0% or 100% for more than 2 seconds.
The ECM has been powered for at least 3 seconds.
Diagnostic codes 29-3, 774-3, 29-4, and 774-4 are not
active.
There are no active 678 or 41 codes.
The ECM sets the Throttle Position to “0%".
If equipped, the warning lamp will come on. The diagnostic
code will be logged if the engine is running. The diagnostic
code will not be logged if the engine is cranking.
Digital Throttle Position Sensor Circuit - Test
91-2
Accelerator Pedal Position 1 : Erratic,
Intermittent, or Incorrect (Engines
equipped with a throttle switch)
The Electronic Control Module (ECM) detects the following
condition:
There is an invalid combination of positions for the multi-
position switch.
If equipped, the warning light will come on.
The ECM will log the diagnostic code.
Throttle Switch Circuit - Test
91-2
Accelerator Pedal Position 1 : Erratic,
Intermittent or Incorrect (Engines
equipped with an analog throttle)
Analog Throttle Position Sensor Circuit - Test
91-3
Accelerator Pedal Position 1 : Voltage
Above Normal (Engines equipped
with an analog throttle)
The Electronic Control Module (ECM) detects one of the
following conditions:
The ECM has been powered for 3 seconds.
Diagnostic code 168-4 is not active.
3509 (262) codes are not active.
The setting for the upper diagnostic limit has been
exceeded for one second.
If equipped, the warning lamp will come on. The diagnostic
code will be logged.
Analog Throttle Position Sensor Circuit - Test
侍#
Some fault codes are not applied to this machine.
Summary of Contents for HX140L
