5-37
J1939 Code
Description
Effect and Action
654-5
Engine Injector Cylinder #04 : Current
Below Normal
These diagnostic codes indicate an open circuit (Iow
current) in either the solenoid or the wiring for the electronic
unit injector.
The EIectronic Control Module (ECM) detects the following
conditions:
A low c:urrent condition (open circuit) for each of fi ve
consecutive attempts to operate.
Battery voltage above 9 VDC for 2 seconds.
The warning light will come on. The ECM will log the
diagnostic code.
The engine will have low power and/or rough running.
When an Cutout Test" is performed, a faulty electronic unit
injector will indicate a low reading in comparison with the
other electronic unit injectors.
The ECM will continue to attempt to operate the electronic
unit injector after the diagnostic code has been logged. An
open circuit will prevent the operation of the electronic unit
injector.
Injector Solenoid Circuit - Test
654-6
Engine Injector Cylinder #04 : Current
Above Normal
These diagnostic codes indicate a short circuit (high
current) in either the solenoid or the wiring for the electronic
unit injector.
The ECM detects the following conditions:
A high current condition (short circuit) for each of fi ve
consecutive attempts to operate.
Battery voltage above 9 VDC for 2 seconds.
The warning light will come on. The ECM will log the
diagnostic code.
The engine will have low power and/or rough running.
The ECM will continue to attempt to operate the electronic
unit injector after the diagnostic code has been logged. A
short circuit will prevent the operation of the electronic unit
injector.
Injector Solenoid Circuit - Test
655-2
Engine Injector Cylinder #05 : Erratic,
Intermittent or
Incorrect (1206E-E66 Engine Only)
Injector Data Incorrect - Test
655-5
Engine Injector Cylinder #05 : Current
Below Normal (1206E-E66 Engine
Only)
Injector Solenoid Circuit - Test
655-6
Engine Injector Cylinder #05 : Current
Above Normal (1206E E66 Engine
Only)
Injector Solenoid Circuit - Test
656-2
Engine Injector Cylinder #06 : Erratic,
Intermittent or Incorrect (1206E-E66
Engine Only)
Injector Data Incorrect - Test
656-5
Engine Injector Cylinder #06 : Current
Below Normal (1206E-E66 Engine
Only)
Injector Solenoid Circuit - Test
侍#
Some fault codes are not applied to this machine.
Summary of Contents for HX140L
