![background image](http://html.mh-extra.com/html/hyundai/hx140l/hx140l_manual_2196330354.webp)
5-27
J1939 Code
Description
Effect and Action
105-15
Engine Intake Manifold #1
Temperature : High - least severe (1)
The engine has been running for 3 minutes.
No other 105 (172) codes are active.
168 codes are not active.
Code 412-16 (E1092 (2)) is not active.
The intake manifold air temperature exceeds the value that
is programmed into the ECM for 8 seconds. The code is
logged.
This code will be reset when the temperature is less than
122
佾
(252
俈
) for 4 seconds.
Intake Manifold Air Temperature Is High
105-16
Engine Intake Manifold #1
Temperature : High - moderate
severity (2)
The engine has been running for 3 minutes.
No other 105 (172) codes are active.
168 codes are not active.
Code 412-16 (E1092 (2)) is not active.
The intake manifold air temperature exceeds the value that
is programmed into the ECM for 8 seconds. The engine will
be shut down. The code is logged.
This code will be reset when the temperature is less than
124
佾
(255
俈
) for 20 seconds.
Intake Manifold Air Temperature Is High
107-3
Engine Air Filter 1 Differential
Pressure : High - Voltage Above
Normal
The ECM detects signal voltage that is not in the
acceptable range.
The code is logged.
Normal The value of the parameter is set to a gauge
pressure.
Sensor Signal (Analog, Active) - Test
107-4
Engine Air Filter 1 Differential
Pressure : High - Voltage Below
Normal
The ECM detects signal voltage that is not in the
acceptable range.
The code is logged.
The value of the parameter is set to a gauge pressure.
Sensor Signal (Analog, Active) - Test
107-15
Engine Air Filter 1 Differential
Pressure : High - least severe (1)
The air fi lter differential pressure is above the trip point
pressure for the delay time.
The code is logged.
Inlet Air Is Restricted
107-16
Engine Air Filter 1 Differential
Pressure : High - moderate severity
(2)
The air fi lter differential pressure is above the trip point
pressure for the delay time.
The code is logged.
The engine power is derated.
Inlet Air Is Restricted
108-3
Barometric Pressure : Voltage Above
Normal
The ECM detects signal voltage that is not in the
acceptable range.
The code is logged.
The value of the parameter is set to a gauge pressure.
Engine Pressure Sensor Open or Short Circuit - Test
108-4
Barometric Pressure : Voltage Below
Normal
The ECM detects signal voltage that is not in the
acceptable range.
The code is logged.
The value of the parameter is set to a gauge pressure.
Engine Pressure Sensor Open or Short Circuit - Test
侍#
Some fault codes are not applied to this machine.
Summary of Contents for HX140L
