![background image](http://html.mh-extra.com/html/hyundai/hx140l/hx140l_manual_2196330745.webp)
8-119
Installing housing assembly
Install 2 EA of M12 eye-bolt into housing
assembly.
Assemble housing into motor by use of
hoist and eye-bolt.
Be sure to tighten eye-bolt deep enough.
5)
21078TM108
(1)
(2)
侍
21078TM109
Installing main bearing (82)
Heat main bearing at 60~70
佘
C and then,
install.
Be sure to maintain it vertical with the
ground when assembling bearing.
6)
(1)
侍
Installing retainer (85) and shim (84)
Measure clearance between main bearing
and retainer by use of jig to decide the
t h i ck n e s s o f s h i m a n d s e l e c t a n
appropriate shim, and then, assemble
retainer.
Apply locktite (#262) on M12 hexagon
head bolt, and then, bolt.
7)
21078TM110
(1)
(2)
Installing coupling
Install coupling on spline of the motor.
8)
21078TM111
(1)
Summary of Contents for HX140L
