![background image](http://html.mh-extra.com/html/hyundai/hx140l/hx140l_manual_2196330473.webp)
6-39-2
CLUSTER
GND
CAN 2 HIGH
CAN 2 LOW
3
6
7
CN-56A
9
6
5
CN-5
CAN 2 HIGH
CAN 2 LOW
09
08
UNITED MCU
CN-51
Cause
Remedy
Defective cluster
Disconnection in
wiring harness or
poor contact
between CN-56A
(6, 7)-CN-5 (5, 6)
Defective united
MCU
Disconnection in
wiring harness or
poor contact
between CN-5 (5,
6)- CN-51(08, 09)
Replace
Repair or replace
(after clean)
Replace
Repair or replace
(after clean)
Check voltage
between
CN-5 (5) and (6)
YES
YES
NO
NO
Check voltage
between
CN-56A (6, 7)
and (3)
140L6ES102
余
Before disconnecting the connector, always turn the starting switch OFF.
余
Before carrying out below procedure, check all the related connectors are properly inserted.
余
After checking, insert the disconnected connectors again immediately unless otherwise specified.
COMMUNICATION ERROR FLASHES ON THE CLUSTER (HCESPN 840, FMI 2)
2.
Starting switch : ON
Voltage : 2V
Starting switch : ON
Voltage : 2V
YES
NO
2V
0V
Check voltage
(SERIAL NO. : #0611-)
Summary of Contents for HX140L
