Hyundai HX140L, Manual

Page: 610 / 819

8-26 8-26
ASSEMBLY
For assembly, reverse disassembly
procedures, but pay attention to the
following items.
Always repair parts that were scored at
disassembly.
Get replacement parts ready beforehand.
Mixing of foreign matter will cause
malfunction.
Therefore, wash parts well with cleaning
oil, let them dry with jet air and handle
them in clean place.
Always tighten bolts, plugs, etc. to their
specified torques.
Do not fail to coat sliding surfaces with
clean hydraulic oil before assembly.
Replace seals such as O-ring with new
ones as a rule.
(1)
刮
刯
到
刱
刲
4)
Spool
Feedback lever
P u t c o m p e n s a t i n g r o d ( 6 2 3 ) i n t o
compensating hole of casing (601).
Put pin force-fitted in lever 1 (612) into
groove of compensating rod and fit lever 1
to pin force-fitted in casing.
(2)
(3)
Fit spool (652) and sleeve (651) into hole
in spool of casing.
Confirm that spool and sleeve slide
smoothly in casing without binding.
Pay attention to orientation of spool. (4)
侍
侍
(210-7) 8-27