8-13
8-13
Pull cylinder block (141) out of pump
casing (271) straightly over drive shaft
(111). Pull out also pistons (151), set
plate (153), spherical bush (156) and
cylinder springs (157) simultaneously.
Take care not to damage sliding surfaces
of cylinder, spherical bushing, shoes,
swash plate, etc.
(7)
侍
Remove hexagon socket head bolts (406)
and then seal cover (F, 261).
Fit bolt into pulling out tapped hole of seal
cover (F), and cover can be removed
easily.
Since oil seal is fitted on seal cover (F),
take care not to damage it in removing
cover.
Remove hexagon socket head bolts (408)
and then seal cover (R, 262).
In case fitting a gear pump, first, remove
gear pump.
Tapping lightly fitting flange section of
swash plate support (251) on its pump
casing side, separate swash plate support
from pump casing.
(8)
侍
侍
(9)
Remove shoe plate (211)and swash plate
(212) from pump casing (271).
(11)
(10)
(210-7) MP03
(210-7) MP04
(210-7) MP05
(210-7) MP06
Summary of Contents for HX140L
