8-166
Assembly
Before assembly, clean the parts.
Coat the sliding surfaces of all parts with
oil.
Cool up bushing (4) fully by some dry ice
and press it into shell (1).
Do not press it at the normal temperature,
or not knock in with a hammer even after
the cooling.
(3)
侍
侍
刮
Press
6
2
5
7
3
2
1
1
4
Install shaft (2) to shell (1).
刲
Install seal (3) to shell (1) and bracket (5).
刱
Coat O-ring (6) with grease thinly, and
install it to shaft (2).
Insert shaft (2) into bracket (5) and drive
in the spring pin (7).
刯
到
8-167(1)
8-167(2)
8-167(3)
8-167(4)
Summary of Contents for HX140L
