![background image](http://html.mh-extra.com/html/hyundai/hx140l/hx140l_manual_2196330611.webp)
8-27
8-27
Lever (1) side
Lever (2) side
(fulcrum plug of
adjusting plug side)
Fit return spring (654) and spring seat
(653) into spool hole and attach snap ring
(814).
(10)
Fit fulcrum plug (614) so that pin force-
fitted in fulcrum plug (614) can be put into
pin hole of lever 2.
Then fix locking ring (858).
Insert adjusting plug (615) and fit locking
ring.
Take care not to mistake inserting holes
for fulcrum plug and adjusting plug.
At this point in time move feedback lever
to confirm that it has no large play and is
free from binding.
(8)
(9)
侍
Put pilot piston (643) into pilot hole of
casing.
Confirm that pilot piston slides smoothly
without binding.
Put pin force-fitted in lever 2 (613) into
groove of pilot piston.
Then fix lever 2.
(6)
侍
(7)
Fit feedback lever (611), matching its pin
hole with pin hole in spool.
Then insert pin (874).
Insert pin in feedback lever a little to ease
operation.
Take care not to mistake direction of
feedback lever.
(5)
侍
侍
(210-7) 8-28
(210-7) REG11
(210-7) REG12
(210-7) REG13
Summary of Contents for HX140L
