1-8
PREVENT ACID BURNS
PREVENT ACID BURNS
Sulfuric acid in battery electrolyte is poisonous.
It is strong enough to burn skin, eat holes in
clothing, and cause blindness if splashed into
eyes.
Avoid the hazard by:
1. Filling batteries in a well-ventilated area.
2. Wearing eye protection and rubber gloves.
3. Avoiding breathing fumes when electrolyte
is added.
4. Avoiding spilling of dripping electrolyte.
5. Use proper jump start procedure.
If you spill acid on yourself:
1. Flush your skin with water.
2. Apply baking soda or lime to help neutralize
the acid.
3. Flush your eyes with water for 10-15
minutes. Get medical attention immediate-
ly.
If acid is swallowed:
1. Drink large amounts of water or milk.
2. Then drink milk of magnesia, beaten eggs,
or vegetable oil.
3. Get medical attention immediately.
13031GE22
USE TOOLS PROPERLY
USE TOOLS PROPERLY
Use tools appropriate to the work. Makeshift
tools, parts, and procedures can create safety
hazards.
Use power tools only to loosen threaded tools
and fasteners.
For loosening and tightening hardware, use the
correct size tools. DO NOT use U.S.
measurement tools on metric fasteners. Avoid
bodily injury caused by slipping wrenches.
Use only recommended replacement parts.
(See Parts catalogue.)
13031GE23
Summary of Contents for HX140L
