8-16
8-16
Place pump casing with its regulator fitting
surface down, fit tilting bush of swash
plate to tilting pin (531) and fit swash plate
(212) to swash plate suppor t (251)
correctly.
Confirm with fingers of both hands that
swash plate can be removed smoothly.
Apply grease to sliding sections of swash
plate and swash plate support, and drive
shaft can be fitted easily.
(3)
侍
侍
Assemble piston cylinder subassembly
佧
c y l i n d e r b l o c k ( 1 4 1 ) , p i s t o n
subassembly (151, 152), set plate (153),
spherical bush (156), spacer (158) and
cylinder spring (157)
佨
.
Fit spline phases of retainer and cylinder.
Then, insert piston cylinder subassembly
into pump casing.
(6)
Assemble seal cover (F, 261) to pump
casing (271) and fix it with hexagon
socket head bolts (406).
Apply grease lightly to oil seal in seal
cover (F).
Assemble oil seal, taking full care not to
damage it.
For tandem type pump, fit rear cover
(263) and seal cover (262) similarly.
(5)
侍
侍
侍
To swash plate support (251), fit drive
shaft (111) set with bearing (123), bearing
spacer (127) and snap ring (824).
Do not tap drive shaft with hammer or so
on.
Assemble them into support, tapping
outer race of bearing lightly with plastic
hammer.
Fit them fully, using steel bar or so on.
(4)
侍
侍
(210-7) MP10
(210-7) MP11
(210-7) MP12
(210-7) MP13
Summary of Contents for HX140L
