Hyundai HX140L, Manual

Page: 601 / 819

8-17 8-17
Fit valve plate (313) to valve block (312),
entering pin into pin hole.
Take care not to mistake suction / delivery
directions of valve plate. (7)
侍
Putting feedback pin of tilting pin into
feedback lever of regulator, fit regulator
and tighten hexagon socket head bolts
(412, 413).
Take care not to mistake regulator of front
pump for that of rear pump.
(9)
侍
Fit valve block (312) to pump casing (271)
and tighten hexagon socket head bolts
(401).
At first assemble this at rear pump side,
and this work will be easy.
Take care not to mistake direction of valve
block.
Clockwise rotation (Viewed from input
shaft side) - Fit block with regulator up
and with delivery flange left, viewed from
front side.
Counter clockwise rotation (Viewed from
input shaft side) - Fit block with delivery
flange right, viewed from front side. (8)
侍
侍
侍
侍
Fit drain port plug (468).
This is the end of reassembling procedures. (10)
(210-7) MP14
(210-7) MP16
(210-7) MP17