![background image](http://html.mh-extra.com/html/hyundai/hx140l/hx140l_manual_2196330712.webp)
8-86
After assembling nut ring (4) by using the jig,
disassemble the clamping.
Tightening torque : 60 kgf · m (434 lbf · ft)
Place lock plate (5) on the nut ring groove.
Select best position from one of 4 casing hole to
assemble lock plate.
11)
侍
12)
侍
Place lock plate th the direction which nut ring is
loosed and then assemble M10 bolt (6) with M8
screw (19) after spreading loctite #242.(Refer to
assembly detail drawing)
Tightening torque (M10) : 5.5
佳
0.6 kgf · m
(39.8
佳
4.3 lbf · ft)
Tightening torque (M8) : 2.7
佳
0.3 kgf · m
(19.5
佳
2.2 lbf · ft)
Make sure that M8 bolt doesn't stick out of lock
plate.
Assembly detail drawing lock plate.
13)
侍
侍
侍
侍
125LCR8TM100
125LCR8TM102
125LCR8TM101
125LCR8TM103
Summary of Contents for HX140L
