Hyundai HX140L, Manual

Page: 743 / 819

8-117
Install No.1 pin (91-5) into No.1 carrier
where the holes for No.1 pin (91-5) are to
be in line with those of No.1 carrier, and
then, install spring pins into the holes. (3)
21078TM100
Caulk carrier holes as shown on the
picture.
Assembly thrust ring (90-7) into carrier.
(4)
(5)
21078TM101
Assembling No.2 carrier
Put No.2 carrier (90-1) on a flat place.
Install No.2 needle bearing (90-3) into
No.2 planetary gear (90-2), put 2 EA of
No.2 thrust washer (90-4) on both sides of
bearing, and then, install it into carrier.
2)
0.5
1.0 - 2.0
Pin & Caulk
Caulk these two in 180
Depth for pinning
21078TM102
(1)
(2)
Install No.2 pin (90-5) into No.2 carrier
where the holes for No.2 pin (90-5) are to
be in line with those of No.2 carrier, and
then, install spring pins into the holes. (3)
21078TM103
Depth for pinning