![background image](http://html.mh-extra.com/html/hyundai/hx140l/hx140l_manual_2196330742.webp)
8-116
6.1 ASSEMBLY REDUCTION GEAR
General notes
Clean every part by kerosene and dry them by air blow.
Surfaces to be applied by locktite must be decreased by solvent.
Check every part for any abnormals.
Each hexagon socket head bolt should be used with locktite No.
262 applied on its threads.
Apply gear oil slightly on each part before assembling.
Take great care not to pinch your hand between parts or tools while assembling nor let fall parts on
your foot while lifting them.
侖
Inspection before reassembling
Thrust washer
Check if there are seizure, abnormal
wear or uneven wear.
Check if wear is over the allowable limit.
Gears
Check if there are pitting or seizure on
the tooth surface.
Check if there are cracks on the root of
tooth by die check.
Bearings
Rotate by hand to see if there are
something unusual such as noise or
uneven rotation.
Floating seal
Check flaw or score on sliding surfaces
or O-ring.
余
余
余
余
余
余
21078TM98
Assembling No.1 carrier
Put No.1 carrier (91-1) on a flat place.
Install No.1 needle bearing (91-5) into
No.1 planetary gear (91-4), put 2 EA of
No.1 thrust washer (91-6) on both sides of
bearing, and then, install it into carrier.
1)
21078TM99
(1)
(2)
Summary of Contents for HX140L
