1-21
HX140 L
1)
余
: Rating over-front
: Rating over-side or 360 degree
余
Note 1. Lifting capacity are based on SAE J1097 and ISO 10567.
2. Lifting capacity of the HX series does not exceed 75% of tipping load with the machine on
firm, level ground or 87% of full hydraulic capacity.
3. The load point is a hook located on the back of the bucket.
4. *indicates load limited by hydraulic capacity.
4.60 m (15' 1") boom, 2.50 m (8' 2") arm equipped with 0.58 m
3
(SAE heaped) bucket and 600
mm (24") triple grouser shoe.
(1)
Load point
height
Load radius
At max. reach
1.5 m (5 ft)
3.0 m (10 ft)
4.5 m (15 ft)
6.0 m (20 ft)
Capacity
Reach
m (ft)
6.0 m
kg
*2820
1930
6.69
(20.0 ft) lb
*6220
4250
(21.9)
4.5 m
kg
*3170
*3170
*2560
2230
2440
1500
7.53
(15.0 ft) lb
*6990
*6990
*5640
4920
5380
3310
(24.7)
3.0 m
kg
*5450
*5450
*4050
3500
3470
2150
2180
1310
7.95
(10.0 ft) lb
*12020
*12020
*8930
7720
7650
4740
4810
2890
(26.1)
1.5 m
kg
*8460
6060
*5190
3230
3340
2040
2100
1250
8.03
(5.0 ft)
lb
*18650
13360
*11440
7120
7360
4500
4630
2760
(26.3)
Ground kg
*8800
5710
5130
3030
3240
1940
2190
1300
7.77
Line
lb
*19400
12590
11310
6680
7140
4280
4830
2870
(25.5)
-1.5 m kg
*6330
*6330
*9780
5660
5040
2950
3200
1900
2500
1500
7.15
(-5.0 ft) lb
*13960
*13960
*21560
12480
11110
6500
7050
4190
5510
3310
(23.5)
-3.0 m kg
*9650
*9650
*8690
5750
5080
2990
3340
2040
6.01
(-10 ft)
lb
*21270
*21270
*19160
12680
11200
6590
7360
4500
(19.7)
Lifting capacities are based upon a standard machine conditions.
Lifting capacities will vary with different work tools, ground conditions and attachments.
The difference between the weight of a work tool attachment must be subtracted.
Consult your Hyundai dealer regarding the lifting capacities for specific work tools and
attachments.
Failure to comply to the rated load can cause possible personal injury or property damage.
Make adjustments to the rated load as necessory for non-standard configurations.
侍
5. LIFTING CAPACITIES
Summary of Contents for HX140L
