8-58-28
When assembling the needle bearing (21),
insert the needle bearing (21) into rear
cover (20) by hammering.
(13)
32038SM36
Insert check (29) and spring (28) in the
valve casing and install O-ring (27) and
back up ring (26). Tighten plug (25) to the
rear cover (20).
(16)
Connect the rear cover (20) with the body
(1) and tighten the wrench bolt (24).
(15)
Reassemble valve plate (23) to the rear
cover (20) and reassemble O-ring (18).
(14)
32038SM37
32038SM38
32038SM39
Summary of Contents for HX140L
