![background image](http://html.mh-extra.com/html/hyundai/hx140l/hx140l_manual_2196330565.webp)
7-17
Preparation
Stop the engine.
Loosen the cap and relieve the pressure
in the tank by pushing the top of the air
breather.
To measure the speed selecting pressure:
Install a connector and pressure gauge
assembly to turning joint P port as shown.
Star t the engine and check for on
leakage from the adapter.
Keep the hydraulic oil temperature at
50
·
5˚C.
Measurement
Select the following switch positions.
Travel mode switch : 1 speed
2 speed
Mode selector : P mode
Measure the travel speed selecting
pressure in the Hi or Lo mode.
Repeat step
ྚ
three times and calculate
the average values.
Evaluation
FOR TRAVEL SPEED SELECTING PRESSURE:
(1)
ྙ
ྚ
ྛ
ྜ
ྜྷ
(2)
ྙ
½
ྚ
ྛ
The average measured pressure should be within the following specifications.
Unit : kgf / cm
2
14)
(3)
Model
HX140 L
Travel speed mode
1 Speed
2 Speed
Standard
0
40
·
5
Maximum allowable
-
-
Remarks
21077MS13
Summary of Contents for HX140L
